Toyota FJ CRUISER 2010 Quick Reference Manual Download Page 88

Page: 88 / 453

1-3. Adjustable components (seats, mirrors, steering wheel)

Before driving

■

To prevent sensor error (vehicles with auto anti-glare inside rear view
mirror)

Auto anti-glare inside rear view mirror

In automatic mode, sensors are used to detect the headlights of
vehicles behind and automatically reduces the reflected light.

Turns automatic mode on/off

The indicator comes on when
automatic mode is turned on.

The mirror will revert to the
automatic mode each time the
engine switch is turned on.

To ensure that the sensors operate prop-
erly, do not touch or cover them.

Summary of Contents for FJ CRUISER 2010






































































































































































































































































































































































































































































Search results

Summary of Contents for FJ CRUISER 2010

Reviews:

Related manuals for FJ CRUISER 2010

Brands by name

Popular brands

Toyota FJ CRUISER 2010, Quick Reference Manual

Search results

Summary of Contents for FJ CRUISER 2010

Reviews:

Related manuals for FJ CRUISER 2010

Brands by name

Popular brands