Toyota FJ CRUISER 2010 Quick Reference Manual Download Page 57

Page: 57 / 453

1-2. Opening, closing and locking the doors

Locking the front doors from the outside without a key

Move the inside door lock button to the lock position.
Close the door.

The door cannot be locked if a front door is open and the key is in the
engine switch.

■

Key reminder buzzer

A buzzer sounds if the driver’s door is opened, while the engine switch is in
the ACC or LOCK position to remind you to remove the key.

■

Customization that can be configured at Toyota dealer

Settings (e.g. unlocking function using a key) can be changed.
(Customizable features

→

P. 412)

Passenger’s door lock switch

Locks all doors
Unlocks all doors

■

Inside door lock button

Locks the door
Unlocks the door

Pulling the inside handle can
open the front door even if the
inside door lock button is in the
lock position.

Summary of Contents for FJ CRUISER 2010






































































































































































































































































































































































































































































Search results

Summary of Contents for FJ CRUISER 2010

Reviews:

Related manuals for FJ CRUISER 2010

Brands by name

Popular brands

Toyota FJ CRUISER 2010, Quick Reference Manual

Search results

Summary of Contents for FJ CRUISER 2010

Reviews:

Related manuals for FJ CRUISER 2010

Brands by name

Popular brands