Toyota FJ CRUISER 2010 Quick Reference Manual Download Page 69

Page: 69 / 453

1-2. Opening, closing and locking the doors

NOTICE

■

Glass hatch damper stays

The glass hatch is equipped with damper stays that hold the glass hatch in
place.

Observe the following precautions.

Failure to do so may cause damage to the glass hatch damper stay, result-
ing in malfunction.

●

Do not attach any foreign objects, such
as stickers, plastic sheets, or adhesives
to the damper stay rod.

●

Do not touch the damper stay rod with
gloves or other fabric items.

●

Do not attach any accessories other
than genuine Toyota parts to the glass
hatch.

●

Do not place your hand on the damper
stay or apply lateral forces to it.

Summary of Contents for FJ CRUISER 2010






































































































































































































































































































































































































































































Search results

Summary of Contents for FJ CRUISER 2010

Reviews:

Related manuals for FJ CRUISER 2010

Brands by name

Popular brands

Toyota FJ CRUISER 2010, Quick Reference Manual

Search results

Summary of Contents for FJ CRUISER 2010

Reviews:

Related manuals for FJ CRUISER 2010

Brands by name

Popular brands