Toyota FJ CRUISER 2010 Quick Reference Manual Download Page 171

Page: 171 / 453

149

2-3. Operating the lights and wipers

Wh
en drivin

Rear window wiper and washer

∗

: If equipped

■

The rear window wiper and washer can be operated when

●

The engine switch must be in the ON position.

●

The glass hatch is closed.

NOTICE

■

When the rear window is dry

Do not use the wipers, as they may damage the rear window.

■

When there is no washer fluid spray from the nozzle

Damage to the washer fluid pump may be caused if the knob is continuously
twisted upward or downward as far as it will go.

Intermittent window wiper
operation.

The wiper operates 3 times at
normal speed and then moves
to intermittent mode.

Normal window wiper oper-
ation
Washer/wiper dual opera-
tion
Washer/wiper dual opera-
tion

The rear window wiper oper-
ates while the washer squirts.

Summary of Contents for FJ CRUISER 2010






































































































































































































































































































































































































































































Search results

Summary of Contents for FJ CRUISER 2010

Reviews:

Related manuals for FJ CRUISER 2010

Brands by name

Popular brands

Toyota FJ CRUISER 2010, Quick Reference Manual

Search results

Summary of Contents for FJ CRUISER 2010

Reviews:

Related manuals for FJ CRUISER 2010

Brands by name

Popular brands