Toyota FJ CRUISER 2010 Quick Reference Manual Download Page 338

Page: 338 / 453

317

4-3. Do-it-yourself maintenance

Mainten

ance an

d ca

Wheels

If a wheel is bent, cracked or heavily corroded, it should be
replaced.

Otherwise, the tire may separate from the wheel or cause loss of
handling control.

■

Wheel selection

When replacing wheels, care should be taken to ensure that
they are equivalent to those removed in load capacity, diameter,
rim width, and inset*.

Replacement wheels are available at your Toyota dealer.

*: Conventionally referred to as “offset”.

Toyota does not recommend using:

●

Wheels of different sizes or types

●

Used wheels

●

Bent wheels that have been straightened

■

Aluminum wheel precautions (if equipped)

●

Use only Toyota wheel nuts and wrench designed for use with
your aluminum wheels.

●

When rotating, repairing or changing your tires, check that the
wheel nuts are still tight after driving 1000 miles (1600 km).

●

Be careful not to damage the aluminum wheels when using
tire chains.

●

Use only Toyota genuine balance weights or equivalent and a
plastic or rubber hammer when balancing your wheels.

Summary of Contents for FJ CRUISER 2010






































































































































































































































































































































































































































































Search results

Summary of Contents for FJ CRUISER 2010

Reviews:

Related manuals for FJ CRUISER 2010

Brands by name

Popular brands

Toyota FJ CRUISER 2010, Quick Reference Manual

Search results

Summary of Contents for FJ CRUISER 2010

Reviews:

Related manuals for FJ CRUISER 2010

Brands by name

Popular brands