Toyota FJ CRUISER 2010 Quick Reference Manual Download Page 173

Page: 173 / 453

151

2-4. Using other driving systems

Wh
en drivin

■

Cruise control can be set when

●

The shift lever is in D or 4 (vehicles with an automatic transmission).

●

Vehicle speed is more than approximately 25 mph (40 km/h).

■

Accelerating

The vehicle can be accelerated normally. After acceleration, the set speed
resumes.

■

Adjusting the speed setting

Increase speed
Decrease speed

Hold the lever until the desired
speed setting is obtained.

Fine adjustment of the set
speed (approximately 1.0 mph
[1.6 km/h]) can be made by
lightly pushing the lever up or
down and releasing it.

■

Canceling and resuming regular acceleration

Cancel

Pull the lever towards you to
cancel cruise control.

The speed setting is also can-
celed when the brakes are
applied or the clutch
depressed (manual transmis-
sion).

Resume

To resume cruise control and
return to the set speed, push
the lever up.

Summary of Contents for FJ CRUISER 2010






































































































































































































































































































































































































































































Search results

Summary of Contents for FJ CRUISER 2010

Reviews:

Related manuals for FJ CRUISER 2010

Brands by name

Popular brands

Toyota FJ CRUISER 2010, Quick Reference Manual

Search results

Summary of Contents for FJ CRUISER 2010

Reviews:

Related manuals for FJ CRUISER 2010

Brands by name

Popular brands