Toyota FJ CRUISER 2010 Quick Reference Manual Download Page 120

Page: 120 / 453

1-7. Safety information

Before driving

■

There is a malfunction in the system

:The system judges a person of adult size as an adult. When a

smaller adult sits in the front passenger seat, the system may rec-
ognize him/her as a child depending on his/her physique and pos-
ture.

:In the event the front passenger does not wear a seat belt.

:When a larger child who has outgrown a child restraint system sits

in the front passenger seat, the system may recognize him/her as
an adult depending on his/her physique or posture.

:Never install a rear-facing child restraint system on the front pas-

senger seat. A forward-facing child restraint system should only be
installed on the front passenger seat when it is unavoidable. (

→

100)

:In case the indicator is not illuminated, consult this manual as for

installing the child restraint system properly. (

→

P. 104)

Indicator/

warning light

AIR BAG ON and AIR BAG OFF indicator

lights

AIR BAG

OFF

SRS warning light

Front passenger’s seat belt reminder light

Off

Devices

Front passenger airbag

Deactivated

Side airbag on the front passenger seat

Curtain shield airbag in the front passenger

side

Activated

Front passenger’s seat belt pretensioner

Summary of Contents for FJ CRUISER 2010






































































































































































































































































































































































































































































Search results

Summary of Contents for FJ CRUISER 2010

Reviews:

Related manuals for FJ CRUISER 2010

Brands by name

Popular brands

Toyota FJ CRUISER 2010, Quick Reference Manual

Search results

Summary of Contents for FJ CRUISER 2010

Reviews:

Related manuals for FJ CRUISER 2010

Brands by name

Popular brands