D33890
Serrated Part
D26290
Lock
Projecting Part
A
--
MANUAL TRANSMISSION/TRANSAXLE
TRANSMISSION CONTROL CABLE ASSY (C53)
41--23
COROLLA Supplement (RM1129E)
10. CONNECT TRANSMISSION CONTROL CABLE ASSY
(TMC MADE)
(a)
Connect the end of the select cable to the shift lever assy,
and install the clip.
NOTICE:
S
The serrate part of the select cable should face up-
ward when the select cable is connected.
S
The clip should be installed in the direction shown in
the illustration.
(b)
Connect the end of the shift cable to the shift lever assy,
and install the clip.
(c)
Connect the control cable assy to the shift lever retainer.
NOTICE:
S
The projecting part of the cable outer should face up-
ward when the control cable assy is connected.
S
After installation, make sure that the cable outer lock
is projecting from A as shown in the illustration.
11. INSTALL FRONT FLOOR HEAT INSULATOR NO.1
(a)
Install the heat insulator No.1 with the 3 nuts.
12. INSTALL EXHAUST PIPE ASSY
13. CONNECT AIR BAG SENSOR ASSY CENTER
(SEE PUB. NO. RM1106E, PAGE 60--74)
14. INSTALL AIR CONDITIONER UNIT ASSY
(SEE PUB. NO. RM1106E, PAGE 55--18)
To Alphabetical Index
To Sub Index
TOYOTA COROLLA REPAIR MANUAL SUPP 1129E