C62956
D26338
Transaxle
Side
C57466
D25281
A
B
C62958
Q01060
42--30
--
CLUTCH
CLUTCH UNIT (C53A/C53)
COROLLA Supplement (RM1129E)
9.
INSPECT CLUTCH DISC ASSY
(a)
Using vernier calipers, measure the rivet head depth.
Minimum rivet depth: 0.3 mm (0.012 in.)
HINT:
Replace the clutch disc assy as necessary.
(b)
Install the clutch disc assy to the transaxle assy.
NOTICE:
Take care not to insert the clutch disc assy in the wrong
direction.
(c)
Using a dial indicator, check the clutch disc assy runout.
Maximum runout: 0.8 mm (0.031 in.)
HINT:
Replace the clutch disc assy as necessary.
10. INSPECT CLUTCH COVER ASSY
(a)
Using vernier calipers, inspect the diaphragm spring for
the depth and width of wear.
Maximum:
A (Depth): 0.5 mm (0.020 in.)
B (Width): 6.0 mm (0.236 in.)
HINT:
Replace the clutch cover assy as necessary.
11.
INSPECT FLYWHEEL SUB--ASSY
(a)
Using a dial indicator, inspect the flywheel sub--assy run-
out.
Maximum runout: 0.1 mm (0.004 in.)
HINT:
Replace the flywheel sub--assy as necessary.
12. INSPECT CLUTCH RELEASE BEARING ASSY
(a)
Check that the clutch release bearing assy moves
smoothly without abnormal resistance by turning the slid-
ing parts of the clutch release bearing assy (contact sur-
faces with the clutch cover) while applying force in the ax-
ial direction.
(b)
Inspect the clutch release bearing assy for damage or
wear.
HINT:
Replace the release bearing assy as necessary.
To Alphabetical Index
To Sub Index
TOYOTA COROLLA REPAIR MANUAL SUPP 1129E
