Toto WASHLET SW4547AT60, Instruction Manual

Page: 31 / 36

60 61
If the toilet is in a location you will not visit for a long time, drain the water.
(The water in the tank may cause malfunctions or become contaminated and cause skin irritation or other problems.)
How to drain the water
6
Reinstall the cover.
(Page 31)
7
Pull out the water drain lever.
•Water comes out from around the wand.
(about 20 seconds)
8 Release your hand to return the
water drain lever to its original
position.
■
If water may get frozen
•Add antifreeze solution in the water in the bowl to
prevent freezing.
(The antifreeze solution should not be flushed out.
Collect it before using the toilet and dispose of it.)
■
To use the product again
•The water needs to be resupplied. (Page 61)
Water drain lever
Resupplying the Water
1
Open the shutoff valve.
(Page 15)
•Check that water is not leaking from a pipe or the main unit.
2 If the power is not on,
(1) Remove the cover on the left side of the main unit, and flip the power switch to "ON".
(Page 15)
•The "Power" LED lights up.
(2) Reinstall the cover. (Page 31)
3 Discharge water from the wand.
(1) Press and hold pressure on the seat sensor with your hand or arm
(see page 11 for details).
(2)
Press "Rear cleansing" button to discharge water from the wand.
•Catch the water in a paper cup or other receptacle.
(3) Press "Stopping" button.
■
If the remaining water has frozen and no water
comes out
•Heat the inside of the bathroom, and warm the water supply hose and
shutoff valve using a cloth soaked in warm water.
Seat sensor (Built-in)
Paper cup
What to Do?
Long Periods of Disuse
1 Close the shutoff valve.
(Page 63)
•The water supply stops.
CAUTION
Do not remove the water filter drain
valve while the shutoff valve is open.
(Otherwise, water may leak out.)
2
Press
"Wand CLEAN" button.
(Release the pressure from the water supply
pipe.)
3 Remove the cover on the left side
of the main unit, and flip the power
switch to "OFF".
(Page 15)
4 Remove the water filter drain valve.
•Loosen the water filter drain valve with a
flat-head screwdriver and then pull it.
Water filter drain valve
Flat-head screwdriver
5 When water draining is
completed, reinstall the water
filter drain valve.
•Insert the water filter drain valve and use a
flat-head screwdriver to tighten it securely.
Reference