35
34
Gap between the Main Unit and Bowl Unit
(Approximately once a month)
You can remove the main unit to clean
the top of the bowl unit and the bottom of
the main unit.
Soft cloth soaked in water
Toilet paper, etc. (May cause damage.)
Gap between the Main Unit and Bowl Unit
(Approximately once a month) (Continued)
4
Mount the main unit.
(1) Lift the main unit, then lower it straight down while
threading the power cord and water supply hose into the
recess on the bowl unit.
Attention!
•
Be careful not to pinch the power cord.
•
Do not excessively bend the water supply hose.
(2) Align the main unit with the center of the
base plate and press it firmly onto the
base plate until a click sound is heard.
Click
Base plate
After mounting, check that the main unit does
not detach even when pulled.
CAUTION
Push the main unit firmly on to the
base plate until a click sound is
heard.
(Failure to do so could cause the main
unit to come loose and fall resulting in
injury.)
5
Flip the power switch to ON.
(Page 30)
•
The "Power" LED lights up.
6
Reinstall the cover.
(Page 31)
1
Remove the cover on the left side
of the main unit, and flip the power
switch to "OFF".
(Page 30)
If the power switch is not turned "OFF", the
unit may malfunction or cause a failure or
electric shock.
2
Remove the main unit.
(1) Pull the main unit toward you while pressing the "Main unit removal button".
Main unit
removal button
Top of the bowl unit
Base plate
Bolt
Attention!
(2) Lift up the main unit.
Attention!
3
Clean the top of the bowl unit and the bottom of the main unit.
•
Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft cloth soaked in
water so that no detergent remains.
•
Do not pull the unit with undue force.
(because the water supply hose and power cord are attached.)
•
Do not excessively bend the
water supply hose.
Maintenance
Gap between the Main Unit and Bowl Unit
Maintenance
