62
63
How to remove the operation guide
Follow the procedure below.
1
Remove the cover on the left side of the main unit, and fl ip the power
switch to "OFF".
(Page 15)
2
Remove the remote control from the hanger.
(Page 14)
3
Remove the hanger and
operation guide.
Hanger
Operation guide
Phillips screwdriver
Screw
4
Screw the hanger on the wall.
5
Mount the remote control in the hanger.
6
Flip the power switch to ON.
(Page 15)
•The "Power" LED lights up.
7
Reinstall the cover.
(Page 31)
■
To install back the operation guide, follow the procedure above.
(Install the operation guide at step
4
.)
First, try the actions described on pages 63 - 69. If the problem persists, consult the installer, seller, or TOTO
customer service (see contact information on the back cover).
CAUTION
If a water leak occurs, close the shutoff
valve.
Please check fi rst
Is the Power LED lit?
■
Is the breaker on the distribution board turned on?
➞
Check whether there is a power outage or the breaker has turned "OFF".
■
Is the power switch fl ipped to "OFF"?
➞
Flip it to "ON". (Page 15 Step
2
-
2
)
■
Is the "Power ON/OFF" setting "OFF"?
➞
Switch it to "ON" with the remote control. (Page 15 Step
2
-
2
)
Is the Energy saver
LED lit?
■
While the LED is lit, energy saver
(Page 26)
is in operation,
so the toilet seat temperature may be reduced or the
heater may be turned off.
Is the remote
control working?
■
Does the display screen
on the back of the remote
show "
"?
➞
Replace the batteries. (Pages 14, 58)
■
Is the remote control
transmitter or the remote
control receiver blocked?
➞
Remove obstructions, dirt, water
droplets or any other blockages.
The remote control
uses
batteries
to operate.
Remote control receiver
Remote control
transmitter
What to Do?
Removal of Operation Guide
Troubleshooting
Reference
