TOSOT DC INVERTER U-MATCH AIR CONDITIONERS
102
Removal and Assembly of Fan Motor
Remarks: Before removing the fan, make sure to cut off the power firstly.
Step
Illustration
Handling Instruction
5.
.
Loosen
the
fan
and
motor.
Use inner hexagonal spanner to
loosen the screws on fan and
remove the clamp fixing the motor.
6. Replace the motor
Firstly, disengage the motor from
motor support. Then, sequentially
disengage the fan sub-assembly
form the motor shaft. Remove the
motor from the air inlet and replace
with new motor. In which, for the
motor with automatic motor support,
the motor support shall be removed
in advance and then changed to the
unit.
7. Assemble the unit in
reverse to the
disassembly procedures
Assemble the unit in reverse to the
disassembly
procedures
and
energize it for testing.
Disassembly of filter screen for return air.
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly.
Do not put filter screen near the high temperature heat source.
Step
Illustration
Handling Instruction
1.Disassembly of filter screen
for return air
Compress the filter screen for return
air down on the guide slot sponge,
and remove according to the
direction shown by the arrow. There
are 2 filter screen for return air.
2.
.
Disassembly of electric box
cover
Disassemble the screw according to
the position shown in the circle and
the box and remove the electric box in
the direction of the arrow.
3.
.
Disassembly
of
electric
parts box
Disassemble the fastening screw and
remove the electrical parts box. (As is
shown in the graph, there are 2
fastening screws in the circle and the
screws in the direction of arrow shall
be disassembled too.)
