RE V. 1.0-12 /16
Pl a st i 350 X P 41
2. Make sure the bursting roll is positioned with an overhang of about 10mm from the edge of the sheet.
3. Place the outer driving wheel slightly rotated so that the left side of the output sheets will be slowed creating a little wave. This is very
helpful for bursting operation on double side laminated sheets.
Fig.6.17
4. Start the lamination process and make sure the feeder is properly adjusted as well as the paper overlap to grant a consistent lamination
process.
5. Turn on the burster with button in the home menu.
Fig.6.18
6. For a proper burster activation it’s necessary to separate the first sheet manually in order to clear the output photocell so that the
software will start the counting correctly as soon as the new sheet come across it.
7. The bursting roll inclination can be further adjusted accordingly to the stock weight. In case the bursting operation does not perform
properly, after checking standard settings described above, increase the height of the roller on side showed in below picture in case of
heavy stock or reduce the distance from the lower roller in case of lower stock.
Fig.6.19
ENG
Ch a P t ER 6: iNst RuC t iONs