DUST- & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
2.2.2
Transporting the Robot
The dust- and drip-proof type robot equals the standard robot added with dust- and
drip-proof parts such as bellows. The precautions to be taken at transport are stated
below. The precautions other than the below are the same as in the standard robot.
See the TH850A/TH1050A Installation and Transportation Manual provided separately.
(The figure below shows the TH850A robot.)
DO NOT hold
the bellows.
DO NOT hold
the bellows.
DO NOT hold the tool
flange and ball screw
spline shaft.
DO NOT hold
the connectors.
DO NOT hold
the arm 2 cover.
Handling areas
(shaded areas)
Fig. 2.3 Robot handling prohibited areas
After the installation, remove the clamp and eyebolt used for transport.
STE 80765
– 18 –
