DUST- & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
3. Installation
3.1 Installation
Environment
Table 3.1 shows the environmental conditions for the location in which the robot and
controller are to be installed.
Table 3.1 Environmental conditions for robot and controller
Item Specifications
In operation
:
0 to 40°C
Temperature
In storage
:
–10 to 50°C
Humidity
20 to 90 % (Non-condensing)
Altitude
1000 m or less
Vibration
In operation
:
0.98 m/s
2
or less
Dust
No inductive dust should exist.
Gas
No corrosive or combustible gas should exist.
Sunlight
The robot and controller should not be exposed to direct sunlight.
Power noise
A heavy noise source should not exist nearby.
Magnetic field
A heavy magnetic field source should not exist nearby.
Dust-proof and
drip-proof
Any place where the equipment sinks in liquid shall not exist.
Small chips involved in turning or cutting operation shall not be
contained.
Mist of cutting fluid or coolant oil shall not be contained.
!
DANGER
• Do not place the robot or controller near combustible. Doing so could lead
to fires if it ignites due to a fault, etc.
STE 80765
– 20 –
