manualshive.com logo in svg

Toshiba Tecra S4, User Manual

The Toshiba Tecra S4 User Manual can be downloaded for free from manualshive.com. This comprehensive manual provides detailed instructions and helpful tips on operating and troubleshooting your Toshiba Tecra S4 laptop. Ensure a seamless user experience by having the manual readily available for easy access and reference.

Share
Download
background image

E-2

User’s Manual

Bluetooth wireless technology Interoperability

■

Bluetooth wireless technology is a new innovative technology, and 
TOSHIBA has not confirmed compatibility of its Bluetooth

™

 products 

with all computers and/or equipment using Bluetooth wireless 
technology other than TOSHIBA portable computers.
Always use Bluetooth

™

 Cards from TOSHIBA in order to enable 

wireless networks over two or more (up to a total of seven) TOSHIBA 
portable computers using these cards. Please contact TOSHIBA PC 
product support on Web site 
http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe 
or
http://www.pc.support.global.toshiba.com in the United States for more 
information.

■

When you use Bluetooth

™

 Cards from TOSHIBA close to 2.4 GHz 

Wireless LAN devices, Bluetooth transmissions might slow down or 
cause errors. If you detect certain interference while you use 
Bluetooth

™

 Cards from TOSHIBA, always change the frequency, move 

your computer to the area outside of the interference range of 2.4 GHz 
Wireless LAN devices (40 meters/43.74 yards or more) or stop 
transmitting from your computer. Please contact TOSHIBA PC product 
support on Web site 
http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe 
or 
http://www.pc.support.global.toshiba.com in the United States for more 
information.

■

Bluetooth

™

 and Wireless LAN devices operate within the same radio 

frequency range and may interfere with one another. If you use 
Bluetooth

™

 and Wireless LAN devices simultaneously, you may 

occasionally experience a less than optimal network performance or 
even lose your network connection.
If you should experience any such problem, immediately turn off either 
one of your Bluetooth

™

 or Wireless LAN. 

Please contact TOSHIBA PC product support on web site 
http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe 
or 
http://www.pc.support.global.toshiba.com in the United States for more 
information.

Summary of Contents for Tecra S4















































































































































































































































Reviews:

No comments

Related manuals for Tecra S4

Tandy 102 Service Manual preview
102
Brand: Tandy Pages: 110
Gateway M-1408j User Manual preview
M-1408j
Brand: Gateway Pages: 130
Gateway ID58 Setup Manual preview
ID58
Brand: Gateway Pages: 2
Gateway LT2001u Quick Manual preview
LT2001u
Brand: Gateway Pages: 11
Gateway EC14 Guía Del Usuario preview
EC14
Brand: Gateway Pages: 116
Gateway Convertible notebook Setup Manual preview
Convertible notebook
Brand: Gateway Pages: 2
Gateway 450SX4 Service Manual preview
450SX4
Brand: Gateway Pages: 87
Gateway 400SD4 Update Manual preview
400SD4
Brand: Gateway Pages: 16
Gateway C-140S Manual preview
C-140S
Brand: Gateway Pages: 10
Gateway 450RGH Specifications preview
450RGH
Brand: Gateway Pages: 10
Gateway 200ARC Replacement Manual preview
200ARC
Brand: Gateway Pages: 8
Gateway Convertible notebook Service Manual preview
Convertible notebook
Brand: Gateway Pages: 74
Gateway 200ARC Reference Manual preview
200ARC
Brand: Gateway Pages: 138
Gateway M-1408j Getting Started Manual preview
M-1408j
Brand: Gateway Pages: 24
Gateway MX6243m Guía De Configuración preview
MX6243m
Brand: Gateway Pages: 2
Gateway MX6211b User Manual preview
MX6211b
Brand: Gateway Pages: 188
Gateway NV-52 Guía De Referencia preview
NV-52
Brand: Gateway Pages: 150
Xebec TRI-SCREEN 2 User Manual preview
TRI-SCREEN 2
Brand: Xebec Pages: 15

Brands by name

Popular brands

Load more brands