manualshive.com logo in svg

Toshiba Tecra A2 Series, Maintenance Manual

Share
Download
Toshiba Tecra A2 Series Maintenance Manual Download Page 2

 

ii 

 

  Satellite A 50/TECRA A2 Maintenance Manual (960 -478) 

  

 

 

 

 

 

 

 

 

 

 

 

 

Copyright 

© 2004 by Toshiba Corporation. All rights reserved.  Under the copyright laws, this manual cannot be 
reproduced in any form without the prior written permission of Toshiba.  No patent liability is assumed with 
respect to the use of the information contained herein. 

Toshiba Satellite A 50/TECRA A2 Series  Maintenance Manual 

First edition April 2004 

Disclaimer 

The information presented in this manual has been reviewed and validated for accuracy.  The included set of 
instructions and descriptions are accurate for the Satellite A 50/TECRA A2 series  at the time of this manual's 
production.  However, succeeding computers and manuals are subject to change without notice.  Therefore, 
Toshiba assumes no liability for damages incurred directly or indirectly from errors, omissions, or discrepancies 
between any succeeding product and this manual. 

Trademarks 

Intel, Intel SpeedStep, Pentium and Celeron are trademarks or registered trademarks of Intel 
Corporation or its subsidiaries in the United States and other countries/regions. 
Windows and Microsoft are registered trademarks of Microsoft Corporation. 
i.LINK is a trademark of Sony Corporation.  
Other trademarks and registered trademarks not listed above may be used in this manual.  

Summary of Contents for Tecra A2 Series



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands