manualshive.com logo in svg

Toshiba Tecra A2 Series, Maintenance Manual

Share
Download
Toshiba Tecra A2 Series Maintenance Manual Download Page 128

3 Tests and Diagnostics 

3.8  Display Test 

3-20 

 

Satellite A50/TECRA A2  Maintenance Manual (960-478) 

3.8  Display Test 

To execute the Display Test, select 

4

 from the DIAGNOSTIC TEST MENU, press 

Enter

 and 

follow the directions on the screen. The Display test contains subtests that test the display in 
various modes. Move the highlight bar to the subtest you want to execute and press 

Enter

.  

Subtest 01 

VRAM Read/Write for VGA 

This subtest writes the constant data (AAh and 55h) and the address data to the 
video RAM. The data is read and compared to the original data. 

Subtest 02 

Gradation for VGA  

This subtest displays four colors: red, green, blue and white from left to right 
across the screen from black to maximum brightness. The display below 
appears on the screen when this subtest is executed.  

 

To exit this subtest and return to the DISPLAY TEST menu, press 

Enter

.  

Subtest 03 

Gradation for LCD 

This subtest displays bands of gradations for mixed colors, then for red, green, 
and blue.  Next, it displays eight solid colors full screen: red, semi-red, green, 
semi-green, blue, semi-blue, white, and semi-white.  The display of each color 
switches automatically every three seconds. 

Summary of Contents for Tecra A2 Series



















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands