Toshiba Tecra A2 Series Maintenance Manual Download

Page: 189 / 338

3.29 SETUP

3 Test and Diagnostics

3-79

Satellite A50/TECRA A2 Maintenance Manual (960 -478)

Always Low

Disables Pentium M processor featuring Intel SpeedStep
technology and always runs the processor at its default
speed.

(e)

Auto Power On

This option shows the setting for the Auto Power On function and Wake-up LAN
function.

Disabled

Parameters for the Auto Power On function and Wake-up
LAN function are set. (Default)

Enabled

Parameters for the Auto Power On function and Wake-up
LAN function are not set. (Default)

When the “Enable” is selected, the following menu appears.

Set the parameters for the Auto Power On (automatic power on) function and the
Wake-up on LAN in the “OPTIONS” window. To set the time, use

Space

BackSpace

. Press

↓

to move the cursor to the right and

↑

to move the cursor to

the left when you set the date and time.

For the

Alarm Time

, set the time to turn on the power automatically. The “second”

cannot be set. When it is set to “Disabled”, the time to turn on automatically is not
set.

For the

Alarm Date Option

, set the date to turn on the power automatically.

When it is set to “Disabled”, the time to turn on automatically is not set.

The

Wake -up on LAN

is a function to turn on the power automatically by the call

from the administrator. It can be set to “Enabled” only when “Built-in LAN” is set
to “Enabled”. To activate this function, use the AC adapter.

Summary of Contents for Tecra A2 Series



















































































































































































































































































































































Search results

Summary of Contents for Tecra A2 Series

Reviews:

Related manuals for Tecra A2 Series

Brands by name

Popular brands

Toshiba Tecra A2 Series, Maintenance Manual

Search results

Summary of Contents for Tecra A2 Series

Reviews:

Related manuals for Tecra A2 Series

Brands by name

Popular brands