Toshiba Tecra A2 Series Maintenance Manual Download

Page: 170 / 338

3 Test and Diagnostics

3.26 Running Test

Satellite A50/TECRA A2 Maintenance Manual (960 -478)

3-60

3.26 Running Test

3.26.1 Function Description

This function automatically executes the following tests in sequence:

System test (subtest 01)

Memory test (subtests 01,02,06)

Real timer test (subtest 02)

Display test (subtest 01)

FDD test (subtest 02)

HDD test (subtests 01,05)

The system automatically detects the number of floppy disk drives connected to the computer for
the FDD test.

3.26.2 Operations

NOTE

: Do not forget to load a formatted work disk in the FDD. If a work disk is not

loaded, an error will be generated during the FDD testing.

Remove the diagnostics disk from the floppy disk drive and insert the formatted work disk.

Select

from the DIAGNOSTIC MENU and press

Enter

The following message is

displayed.

Printer wrap around test (Y/N) ?

Selecting

Y (yes)

executes the printer wraparound test. A printer wraparound connector

must be connected to the parallel port of the computer to execute properly this test.

Select

and press

Enter

. The following message will appear:

Serial #A wrap around test (Y/N) ?

Selecting

Y (yes)

executes the Serial #A test. An RS-232C wraparound connector must

be connected to the serial port of the computer to execute properly this test. The Serial #A
test can not be executed since the computer is not equipped with a serial port. Press

Summary of Contents for Tecra A2 Series



















































































































































































































































































































































Search results

Summary of Contents for Tecra A2 Series

Reviews:

Related manuals for Tecra A2 Series

Brands by name

Popular brands

Toshiba Tecra A2 Series, Maintenance Manual

Search results

Summary of Contents for Tecra A2 Series

Reviews:

Related manuals for Tecra A2 Series

Brands by name

Popular brands