manualshive.com logo in svg

Toshiba T-Series T6600c, User Manual

Share
Download
Toshiba T-Series T6600c User Manual Download Page 44

3-2

T6600C, T6600C/CD, T6600C/CDV

The following equipment is required to perform some of the T6600C Diagnostic Test pro-
grams.

❑

The T6600C Diagnostics Disk (all tests)

❑

A formatted working disk for the floppy disk drive test (all tests)

❑

3.5-inch 2HD/2DD disk for the internal 3.5-inch FDD

❑

5.25-inch 2D disk for an external 5.25-inch FDD

❑

A cleaning kit to clean the floppy disk drive heads (Head Cleaning)

❑

A printer wraparound connector (34M741986G01) for the printer wraparound test
(Printer test)

❑

An RS-232-C wraparound connector (34M741621G01) for the RS-232-C port wrap-
around test (ASYNC test)

❑

An external SVGA display for the SVGA display test

❑

An optional memory card for the memory module test

❑

A PCMCIA wraparound card for the PCMCIA wraparound test

❑

A wraparound board for a 16-bit bus (34P711656G01) for the 32 bus wraparound test

❑

An RS-232-C direct cable for the point-to-point test (ASYNC test)

❑

An F, Z special connector for the F, Z connector check test

❑

A turbo cache memory module for the turbo cache memory test

The sections that follow detail the tests within the Diagnostic Test function of the
DIAGNOSTIC MENU.  Refer to Sections 3.17 through 3.23 for detailed information on the
remaining Service Program Module functions.

Summary of Contents for T-Series T6600c






























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands