T6600C, T6600C/CD, T6600C/CDV
4-23
4.11 5.25-inch Bay (T6600C)
Removing the 5.25-inch Bay
To remove the T6600C’s 5.25-inch bay, follow the steps below and refer to Figure 4-21.
1.
Turn off the power to the computer, then disconnect the power cord and all
external cables connected to the computer.
2.
Remove the optional PCMCIA card, optional memory card(s), keyboard unit,
optional turbo cache memory module, back cover, optional expansion card, and
bottom cover as described in Sections 4.2 through 4.5, and 4.7 through 4.9.
3.
Remove the
three M3x6 screws
securing the
5.25-inch bay
and lift it out.
Figure 4-21 Removing the 5.25-inch Bay
Installing the 5.25-inch Bay
To install the T6600C’s 5.25-inch bay, follow the steps below and refer to Figure 4-21.
1.
Set the
5.25-inch bay
in place and secure it with
three M3x6 screws
.
2.
Install the bottom cover, optional expansion card, back cover, optional turbo
cache memory module, keyboard unit, optional memory card(s), and optional
PCMCIA card as described in Sections 4.9 through 4.7, and 4.5 through 4.2.
