Toshiba Strata CIX IP5000 Series Page 173 User Manual Download

Page: 173 / 216

Administrator Programming

IP5131-SDL Settings

Strata CIX IP5000-series Telephone UG 04/09

155

Keybeep, Room Noise, Handset BOV, Carbon Handset, and Carbon Headset

Important!

The following steps apply to all of the above items.

1. From the IP Configurations screen, select Sound >

Keybeep (or any of the above items). The appropriate
screen displays.

2. Press the On or Off soft keys to change the set value.

3. Press the Set soft key to accept the change.



...or press the Cancel soft key to cancel the change.



The changed setting is underlined in the Sound screen
display.

Headset Tx Control Setting Screen

1. From the IP Configurations screen, select Sound >

> Headset Tx Ctl. The Headset Tx Control screen
displays.

2. Press the Low or Normal soft keys to change the set

value.

3. Press the Set soft key to accept the change.



...or press the Cancel soft key to cancel the change.



The changed setting is underlined in the Sound screen
display.

Keybeep

Off

[Set]

[Cancel]

Config

Headset Tx Control

Low

Normal

[Set]

[Cancel]

Config

Summary of Contents for Strata CIX IP5000 Series

























































































































































































































Search results

Summary of Contents for Strata CIX IP5000 Series

Reviews:

Related manuals for Strata CIX IP5000 Series

Brands by name

Popular brands

Toshiba Strata CIX IP5000 Series, User Manual

Search results

Summary of Contents for Strata CIX IP5000 Series

Reviews:

Related manuals for Strata CIX IP5000 Series

Brands by name

Popular brands