Toshiba Satellite Pro T110D User Manual Download

Page: 86 / 159

6-2

User’s Manual

Power and Power-Up Modes

Power indicators

As shown in the above table, the

Battery

Power

indicators on the system

indicator alert you to the computer's operating capability and battery charge

status.

Battery indicator

Check the

Battery

indicator to determine the status of the battery pack.

The following indicator lights indicate the battery status:

Universal

adaptor

not

connected

Battery charge is
above low battery
trigger point

• Operates
• LED:

Battery

off

Battery charge is
below low battery
trigger point

• Operates
• LED:

Battery

flashes amber

Battery charge is
exhausted

Computer shuts down

No Battery
installed

• Cannot operate
• LED:

Battery

off

Table Power conditions

Power on

Power off

(no operation)

Flashing amber

The battery charge is low. The AC adaptor must

be connected to recharge the battery.

Amber

Indicates the AC adaptor is connected and

charging the battery.

Green

Indicates the AC adaptor is connected and the

battery is fully charged.

No light

Under any other conditions, the indicator does

not light.

If the battery becomes too hot while it is being charged, the charge will

stop and the

Battery

indicator will go out. When the battery's temperature

falls to a normal range, charge will resume. This occurs whether the

computer's power is on or off.

Summary of Contents for Satellite Pro T110D
































































































































































Search results

Summary of Contents for Satellite Pro T110D

Reviews:

Related manuals for Satellite Pro T110D

Brands by name

Popular brands

Toshiba Satellite Pro T110D, User Manual

Search results

Summary of Contents for Satellite Pro T110D

Reviews:

Related manuals for Satellite Pro T110D

Brands by name

Popular brands