Toshiba Satellite Pro T110D User Manual Download Page 60

Page: 60 / 159

3-14

User’s Manual

Getting Started

Restoring the preinstalled software from Recovery

Media

If the preinstalled files are damaged, use the Recovery Media you created,

or HDD recovery to restore them. To restore the operating system and all

preinstalled software, follow the steps below.

1. Load the Recovery Media in the optional optical media drive and turn off

the computer's power.

2. Hold down the

F12

key and turn on the power. When "TOSHIBA

Leading Innovation >>>" appears, release the

F12

key.

3. Use the upper or lower cursor key to select the CD/DVD in the display

menu. For details, refer to the

Boot Priority

section in Chapter 7,

Setup

4. A menu appears. Follow the on-screen instructions.

When you reinstall the Windows operating system, the hard disk will be

reformatted and all data will be lost.

When drivers/utilities are installed, you can setup the respective drivers/

utilities from following place.
To open the setup files, Click

Start

All Programs

TOSHIBA

Applications and Drivers

Summary of Contents for Satellite Pro T110D
































































































































































Search results

Summary of Contents for Satellite Pro T110D

Reviews:

Related manuals for Satellite Pro T110D

Brands by name

Popular brands

Toshiba Satellite Pro T110D, User Manual

Search results

Summary of Contents for Satellite Pro T110D

Reviews:

Related manuals for Satellite Pro T110D

Brands by name

Popular brands