Toshiba Satellite Pro T110D User Manual Download Page 139

Page: 139 / 159

E-2

User’s Manual

TOSHIBA PC Health Monitor

Toshiba's obligations under its standard limited warranty in any way.

Toshiba's standard limited warranty terms and limitations apply.

Starting the TOSHIBA PC Health Monitor

The TOSHIBA PC Health Monitor can be started using the following

methods:

■

Click Start

All Programs

TOSHIBA

Utilities

PC Health

Monitor

■

Click the icon in the notification area, then click the "

Click here to

enable TOSHIBA PC Health Monitor

." message when it is displayed.

(*)

No matter which method is used, the TOSHIBA PC Health Monitor

explanation screen will be displayed.
Clicking "

Next

" will display the "

TOSHIBA PC Health Monitor Software

Notice & Acceptance

" screen. Please carefully read the information

displayed. Selecting "

ACCEPT

" and clicking "

" will enable the program.

By enabling the TOSHIBA PC Health Monitor software, you agree with

these terms and conditions and to the use and sharing of the collected

information. Once the program is enabled, the TOSHIBA PC Health

Monitor screen is displayed, and the program will begin monitoring system

functions and collecting information.

(*) This message will no longer be displayed after clicking "

ACCEPT

" or

DECLINE

" on the "

TOSHIBA PC Health Monitor Software Notice &

Acceptance

" screen.

If a TOSHIBA PC Health Monitor message is

displayed

A message will be displayed if any changes which may interfere with the

operation of the program are detected.
* If a message is displayed, follow the instructions displayed on screen.

Summary of Contents for Satellite Pro T110D
































































































































































Search results

Summary of Contents for Satellite Pro T110D

Reviews:

Related manuals for Satellite Pro T110D

Brands by name

Popular brands

Toshiba Satellite Pro T110D, User Manual

Search results

Summary of Contents for Satellite Pro T110D

Reviews:

Related manuals for Satellite Pro T110D

Brands by name

Popular brands