3-10
User’s Manual
Getting Started
Automatic Hibernation Mode
The computer will enter Hibernation mode automatically when you press
the power button or close the Display Screen. First, however, make the
appropriate settings according to the steps below.
1. Open the
Control Panel
.
2. Open
System and Security
and open
Power Options
.
3. Select the
Choose what the power button does
.
4. Enable the desired Hibernation settings for
When I press the power
button
and
When I close the lid
.
5. Click the
Save changes
button.
Data saving in Hibernation Mode
When you turn off the power in Hibernation Mode, the computer takes a
moment to save current memory data to the hard disk. During this time, the
disk
indicator will light.
After you turn off the computer and memory is saved to the hard disk, turn
off the power to any peripheral devices.
Restarting the computer
Certain conditions require that you reset the system. For example, if:
■
You change certain computer settings.
■
An error occurs and the computer does not respond to your keyboard
commands.
■
There are three ways to reset the computer system:
1. Click
, click arrow button
and select
Restart
from the menu.
2. Press
CTRL + ALT + DEL
to display the menu window, then select
Restart
from the
Shut down
options.
3. Press the power button and hold it down for five seconds. Once the
computer has turned itself off, wait between ten and fifteen seconds
before turning it on again with the power button.
Do not turn the computer or devices back on immediately. Wait a moment
to let all capacitors fully discharge.
