Toshiba Satellite Pro T110D User Manual Download Page 42

Page: 42 / 159

2-8

User’s Manual

The Grand Tour

The underside of the computer (Satellite T110D, Satellite Pro T110D, PORTEGE T110D)

1. Memory Module Cover
2. Battery Lock
3. Battery Pack

4. Battery Release Latch
5. Speakers

Memory Module

Cover

This cover protects two memory module sockets --

one or two modules are pre-installed. Refer to the

Memory expansion

section in Chapter 8,

Optional

Devices

Battery Lock

Slide this lock to prepare the battery pack for

removal.

Battery Pack

The battery pack powers the computer when the

AC adaptor is not connected. For detailed

information on the battery pack, refer to

Chapter 6,

Power and Power-Up Modes

Battery Release

Latch

Slide and hold this latch to release the battery

pack for removal. For detailed information on

removing the battery pack, refer to Chapter 6,

Power and Power-Up Modes

Speakers

The speakers emit sound generated by your

software as well as audio alarms, such as low

battery condition, generated by the system.

Summary of Contents for Satellite Pro T110D
































































































































































Search results

Summary of Contents for Satellite Pro T110D

Reviews:

Related manuals for Satellite Pro T110D

Brands by name

Popular brands

Toshiba Satellite Pro T110D, User Manual

Search results

Summary of Contents for Satellite Pro T110D

Reviews:

Related manuals for Satellite Pro T110D

Brands by name

Popular brands