manualshive.com logo in svg

Toshiba Satellite Pro S750 Series, User Manual

The Toshiba Satellite Pro S750 Series User Manual is your essential guide to understanding and maximizing the features of this high-performance laptop. Download this detailed manual for free from manualshive.com to effortlessly navigate through your device's functionalities, ensuring a seamless user experience.

Share
Download
background image

User’s Manual

1-15

Getting Started

1. Load the Recovery Media into the computer and turn off the computer's 

power.

2. While holding down 

F12

 key on the keyboard, turn on your computer - 

when the 

TOSHIBA Leading Innovation >>>

 logo screen 

appears, release the 

F12

 key.

3. Use the up and down cursor key to select the appropriate option from 

the menu according to your actual recovery media. Please refer to the 

Boot Setting

 section in Chapter 7, HW Setup for further information.

4. A menu will be displayed from which you should follow the on-screen 

instructions.

When you reinstall the Windows operating system, the hard disk will be 

reformatted and all data will be lost.

When drivers/utilities are installed, you can setup the respective 

drivers/utilities from the following place. To open the setup files, Click 

Start

 

->

 

All Programs

 

->

 

TOSHIBA

 

->

 

Applications and Drivers

.

Summary of Contents for Satellite Pro S750 Series













































































































































































































Reviews:

No comments

Related manuals for Satellite Pro S750 Series

EUROCOM W110ER Service Service Manual preview
W110ER Service
Brand: EUROCOM Pages: 102
Panasonic CF-T5MWETZBM Brochure preview
CF-T5MWETZBM
Brand: Panasonic Pages: 2
Panasonic CF-T5MWETDVM - Toughbook T5 - Core Duo 1.06 GHz Specifications preview
CF-T5MWETDVM - Toughbook T5 - Core Duo 1.06 GHz
Brand: Panasonic Pages: 2
Panasonic CF-U1G Supplementary Instructions Manual preview
CF-U1G
Brand: Panasonic Pages: 8
Panasonic CF-H1BDBBZCM Specifications preview
CF-H1BDBBZCM
Brand: Panasonic Pages: 2
Panasonic CF-H1BDBBZCM Supplementary Manual preview
CF-H1BDBBZCM
Brand: Panasonic Pages: 3
Panasonic CF-53AUGZK1M Specifications preview
CF-53AUGZK1M
Brand: Panasonic Pages: 2
Panasonic CF-73ECQTXxM Service Manual preview
CF-73ECQTXxM
Brand: Panasonic Pages: 16
Panasonic CF-TOUGHBOOK 31UFLAXxM Service Manual preview
CF-TOUGHBOOK 31UFLAXxM
Brand: Panasonic Pages: 33
Panasonic CF-534 Series Operating Instructions - Basic Manual preview
CF-534 Series
Brand: Panasonic Pages: 28
Panasonic CF-74ECBAXBM - Toughbook 74 - Core Duo 2 GHz Use And Care Manual preview
CF-74ECBAXBM - Toughbook 74 - Core Duo 2 GHz
Brand: Panasonic Pages: 31
Panasonic CF-T4HWETZBM Service Manual preview
CF-T4HWETZBM
Brand: Panasonic Pages: 54
Panasonic CF-AX2 Series Operating Instructions Manual preview
CF-AX2 Series
Brand: Panasonic Pages: 44
Panasonic CF-73N3LTSKM - Toughbook 73 - Pentium M 1.7 GHz Operating Instructions Manual preview
CF-73N3LTSKM - Toughbook 73 - Pentium M 1.7 GHz
Brand: Panasonic Pages: 44
Panasonic CF-C2 series Operating Instructions Manual preview
CF-C2 series
Brand: Panasonic Pages: 48
Panasonic CF-LX3 series Operating Instructions Manual preview
CF-LX3 series
Brand: Panasonic Pages: 52
Panasonic CF-W4GWCZZ Service Manual preview
CF-W4GWCZZ
Brand: Panasonic Pages: 68
Panasonic CF-63LYJ8AAM/E User Manual preview
CF-63LYJ8AAM/E
Brand: Panasonic Pages: 52

Brands by name

Popular brands

Load more brands