Toshiba Satellite Pro S750 Series User Manual Download Page 19

Page: 19 / 204

User’s Manual

xix

Satellite Pro S750

TEAC

■

DVD-ROM drive DV-28S

■

DVD Super Multi with Double Layer Recording DV-W28S

Panasonic Communications

■

DVD Super Multi with Double Layer Recording UJ8A0

■

The DVD-ROM/DVD Super Multi drive model employs a laser system.

To ensure proper use of this product, please read this instruction

manual carefully and retain for future reference. Should the unit ever

require maintenance, contact an authorized service location.

■

Use of controls, adjustments or the performance of procedures other

than those specified may result in hazardous radiation exposure.

■

To prevent direct exposure to the laser beam, do not try to open the

enclosure.

Panasonic System Networks Co., Ltd.

Summary of Contents for Satellite Pro S750 Series













































































































































































































Search results

Summary of Contents for Satellite Pro S750 Series

Reviews:

Related manuals for Satellite Pro S750 Series

Brands by name

Popular brands

Toshiba Satellite Pro S750 Series, User Manual

Search results

Summary of Contents for Satellite Pro S750 Series

Reviews:

Related manuals for Satellite Pro S750 Series

Brands by name

Popular brands