Toshiba Satellite Pro A110 Maintenance Manual Download

Page: 81 / 143

3. Tests and Diagnostics

3.7 Main Battery Change Test

Battery type (Lion)

Manufacturer (Sanyo/Panasonic)

Remain charge capacity (0 ~ 100%)

Charge function (PASS/FAIL)

- “Battery Is Full” showed when “remain charge capacities” is 100%

The screen should display as below, indicating whether the test is passed or failed when finished.

3. 8 FDD Test

NOTE: Before running the FDD test, prepare a formatted work diskette (1.44 MB).
Remove the diagnostics diskette and insert the work diskette into the FDD. The contents of
the floppy diskette maybe erased.

The Floppy Disk Test includes three subtests of the:

3-12 Satellite A110 Series Maintenance Manual

Summary of Contents for Satellite Pro A110
















































































































































Search results

Summary of Contents for Satellite Pro A110

Reviews:

Related manuals for Satellite Pro A110

Brands by name

Popular brands

Toshiba Satellite Pro A110, Maintenance Manual

Search results

Summary of Contents for Satellite Pro A110

Reviews:

Related manuals for Satellite Pro A110

Brands by name

Popular brands