Toshiba Satellite Pro A110 Maintenance Manual Download Page 86

Page: 86 / 143

3.11 Mouse (Pad) Test

3. Tests and Diagnostics

3.11 Mouse (Pad) Test

The Mouse test allows the user to select and assign values to the following, using the Touch Pad
or “

Tab”

key to move between selections:

Mouse Speed (on a scale from slow to fast)

Acceleration (Off, Low, Medium, High)

Button Assignments (Left + Right / Right button, either Unassigned or Drag
Lock)

Swap Buttons (Left /Right)

NOTE: The Touch Pad test cannot be used to test an external USB mouse.

The Touch Pad button subtest allows users to test their Touch Pad buttons. If the buttons are
clicked, the cursors should appear in the corresponding box of the button figure that is displayed
on the screen as below.

3-17 Satellite A110 Series Maintenance Manual

Summary of Contents for Satellite Pro A110
















































































































































Search results

Summary of Contents for Satellite Pro A110

Reviews:

Related manuals for Satellite Pro A110

Brands by name

Popular brands

Toshiba Satellite Pro A110, Maintenance Manual

Search results

Summary of Contents for Satellite Pro A110

Reviews:

Related manuals for Satellite Pro A110

Brands by name

Popular brands