manualshive.com logo in svg

Toshiba Satellite P20, User Manual

Share
Download
Toshiba Satellite P20 User Manual Download Page 85

 

Mobile Computing 

User's Manual 

4-8 

Satellite P20

 Version 

1

 Last Saved on 30/05/2003 13:57 

ENGLISH using Euro_M.dot –– Printed on 30/05/2003 as T202014-EN 

Changing The Battery 

When your battery runs out of power, you have two options- connect the 
AC adapter or install a fresh battery. For instructions on using the AC 
adapter, see “Connecting the AC adapter” in chapter 2. 

Removing the battery 

1. 

Save your work.

 

2. 

Turn off the computer. Never remove the battery while the computer is 
on.

 

3. 

Close the display panel, ensuring that it snaps in to place.

 

4. 

Turn the computer upside down with the front of the computer facing 
towards you.

 

5. 

Unlock the 2nd Module Bay Lock.

 

6. 

Slide the 2nd Module Release Latch toward the right.

 

7. 

Pull the battery carefully out of the 2nd

 

Module Bay.

 

The2nd Module Bay Latch is spring-loaded and will snap back into place 
when you release it. 

 

  

Summary of Contents for Satellite P20















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands