manualshive.com logo in svg

Toshiba Satellite P20, User Manual

Share
Download
Toshiba Satellite P20 User Manual Download Page 39

 

Finding Your Way Around 

User's Manual 

1-9 

Satellite P20

 Version 

1

 Last Saved on 30/05/2003 13:57 

ENGLISH using Euro_M.dot –– Printed on 30/05/2003 as T202014-EN 

Bottom Side 

MAIN MODULE BAY 

LOCK 

BLUETOOTH/MODEM 

MODULE COVER  

FAN COVER 

2ND MODULE BAY 

LOCK 

 

MAIN MODULE BAY 

LATCH 

WIRELESS LAN CARD 

MODULE COVER  

MEMORY MODULE 

COVER  

2ND MODULE BAY 

LATCH 

 

  The 

Memory Module Cover

 protects the system memory modules. 

  The 

Bluetooth/Modem Module Cover 

protects the Bluetooth device (if 

installed; some configurations may not have it) and the internal modem. 

  The 

Wireless LAN Card Module Cover

 protects the Wireless LAN Card 

(some configurations may not have it.)  

  The two 

Module Locks

 secure the modules in the Main and 2nd Module 

bays, preventing them from accidentally falling out if the release latches 
are inadvertently pressed. 

  The two 

Module Release Latches

 disconnect the modules from their 

bays. To remove the Main Module, place the closed computer upside 
down with its front toward you. Unlock the Module Bay lock on the Main 
Module Bay side, slide on the latch on the Main Module Bay side and 
then slide it toward the outside edge of the computer. Remove the 
module from its bay. Follow the same steps for the 2nd Module. 

Summary of Contents for Satellite P20















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands