Learning The Basics
User's Manual
3-10
Satellite P20
Version
1
Last Saved on 30/05/2003 13:57
ENGLISH using Euro_M.dot –– Printed on 30/05/2003 as T202014-EN
The CD-ROM / DVD-ROM / CD-RW/DVD / DVD-R/-RW /
DVD Multi drive
Press the eject button to open the disc tray. The eject button will open
the disc tray even when the computer is off if the battery has power and
the computer is in CD mode.
If the computer is turned off and there is no power, use the manual eject
button.
Inserting discs into the drive
1.
Press the eject button to open the disc tray.
2.
Pull the disc tray until it is fully open.
3.
Hold the disc by its edges, ensure it is dust-free, and place it carefully
in the disc tray, with the label side up.
4.
Press down on the disc until it locks on the spindle.
5.
Close the disc tray.
If the disc is not seated properly when you close the disc tray, the disc
might be damaged and the tray may not open fully when you press the
eject button.
Removing discs from the drive
1.
Press the eject button.
Do not press the eject button while the computer is accessing the
CDROM/DVD-ROM drive (the Module Bay LED on the left side of the
keyboard flashes when the system is accessing the disc drive). If the disc
is still spinning when you open the disc tray, wait for it to stop before you
remove it.
2.
Pull the disc tray until it is fully open, remove the disc, and place it in
its protective cover.
3.
Close the disc tray.
Playing compact discs
Turn to chapter 1 to learn about the CD control buttons which are located
on the front of your computer. For information on playing DVDs and
digital music files such like MP3s, and on playing CDs with your computer
turned off, see chapter 5.
