manualshive.com logo in svg

Toshiba Satellite A200 Series, Maintenance Manual

Share
Download
Toshiba Satellite A200 Series Maintenance Manual Download Page 193

3.30  SETUP 

3 Tests and Diagnostics 

PORTEGE A200 Maintenance Manual (960-499) 

 

3-95 

(e)

 

Auto Power On 

This option displays setting for Auto Power On. 

Disabled

    

 

Indicates auto power on is not set. 

Enabled

   

 

Indicates auto power on is set. 

When “Enabled” is selected, the following sub-window appears. 

 

 

 

Set the parameters for the Auto Power On (automatic power on) function in the 
“OPTIONS” window. To set the time, use 

Space

 or 

BackSpace

. Press 

?

 to 

move the cursor to the right and 

?

 to move the cursor to the left when you set the 

date and time. 

For the 

Alarm Time

, set the time to turn on the power automatically. The “second” 

cannot be set. When it is set to “Disabled”, the time to turn on automatically is not 
set. 

For the 

Alarm Date Option

, set the date to turn on the power automatically. 

When it is set to “Disabled”, the time to turn on automatically is not set. 

The 

Ring Indicator 

is displayed only when the computer is in Resume mode and 

this function cannot be used for a PC card-type modem. When any modem is not 
installed, it is not displayed. 
 

Note: 

 

1.  Do not remove the AC adaptor and battery pack at the same time when you 

   

 

 

use this feature.  If you do so, data saved by the resume function will be lost.  

   

 

 

You must also reset this option. 

2.  If you have set a password and the computer boots by the Auto Power On  

   

 

 

function and Resume is on, the computer will start with the instant security 

   

 

 

function enabled. The 

password =

 message is not displayed; however, you  

   

 

 

must enter the password to use the computer. 

3.  This option is enabled only once, the setting is reset, after booting up. 

(f)

 

Start Up Logo 

This option enables or disables an animation logo function. 

Animation

  

Enables the animation logo function. (Default)  

Picture

 

 

 

Displays picture logo. 

Alarm Time  

 

= 00:00:00 

Alarm Date Option 

= Disabled 

Ring Indicator 

 

= Disabled  

OPTIONS 

Summary of Contents for Satellite A200 Series























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands