manualshive.com logo in svg

Toshiba Satellite A200 Series, Maintenance Manual

Share
Download
Toshiba Satellite A200 Series Maintenance Manual Download Page 115

3.9  Display Test  

3  Tests and Diagnostics 

PORTEGE A200 Maintenance Manual (960-499) 

 

3-19 

3.9   Display Test 

To execute the Display Test, select 

4

 from the DIAGNOSTIC TEST MENU, press 

Enter

 and 

follow the directions on the screen. Move the highlight bar to the subtest you want to execute and 
press 

Enter

. 

Subtest 01 

VRAM read/write for VGA 

This subtest writes the constant data (AAh and 55h) to the video RAM. The data is 
read and compared to the original data. 

Subtest 02 

Gradation for VGA  

This subtest displays four colors: red, green, blue and white from left to right across 
the screen from black to maximum brightness. The display below appears on the 
screen, when this subtest is executed.  

 

To exit this subtest and return to the DISPLAY TEST menu, press 

Enter

.  

Subtest 03 

Gradation for LCD 

This subtest displays bands of gradations for mixed colors, then for red, green, and 
blue. Next, it displays eight solid colors full screen: red, semi-red, green, semi-
green, blue, semi-blue, white, and semi-white. Each color displays for three 
seconds. 

Summary of Contents for Satellite A200 Series























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands