Toshiba Satellite A200 Series, Maintenance Manual

Page: 146 / 342

3.22 Log Utilities 3 Tests and Diagnostics
PORTEGE A200 Maintenance Manual (960-499) 3-49
3.22.2 Operations
1. Select
5
and press
Enter
in the DIAGNOSTIC MENU, the error information is displayed
in the following format:
XXXXX ERRORS
CNT TS-NO PASS STS ADDR
WD RD HSTS [ERROR STATUS NAME]
001 FDD 02 0000 103 00001 00 00 0000 FDD-WRITE PROTECTED
001 FDD 01
0000 180 00001 00 00 0000 FDD-TIME OUT ERROR
[[1:Next,2:Prev,3:Exit,4:Clear,5:Print,6:FD Log Read,7:FD Log Write]]
2. The error information displayed on the screen can be manipulated by the following number
keys:
The 1 key scrolls the display to the next page.
The
2
key scrolls the display to the previous page.
The 3 key returns to the Diagnostic Menu.
The
4
key erases all error log information in RAM.
The 5 key outputs the error log information to a printer.
The
6
key reads the log information from a floppy disk.
The 7 key writes the log information to a floppy disk.
3. In the case of “error retry OK,” a capital “R” will be placed at the beginning of the error
status. However, it is not added to the error count.
Error status name
Error count
Pass count
Error status
Subtest number
Address
Test name
Read data
Write data
HDC status