manualshive.com logo in svg

Toshiba Satellite A200 Series, Maintenance Manual

Share
Download
Toshiba Satellite A200 Series Maintenance Manual Download Page 106

3  Tests and Diagnostics 

3.3  Setting of the hardware configuration 

3-10  

 

PORTEGE A200 Maintenance Manual (960-499) 

?

 

Setting of the HWSC 

?

 

Setting of the UUID 

?

 

Display of the DMI information (including UUID) 

?

 

Setting of DVD region code (Yes/No) 

 

After completion of the above settings, H/W configuration & DMI information 

are appeared in order. Check the contents and press 

Enter

. 

Subtest 02   

Region write 

 

This subtest executes the setting of the region code for DVD drive based on the 

destination of the machine.  

 

When the region code is already written, test ends without setting.  

 

The following message appears in the display after setting the region code. 

Press any key to return to the H/W initial information setting tool menu. 

*********************************** 
*******     It completed    ******* 
*********************************** 

                *   

 

    

 

 

              

  * 

 

 

 

 

 

 

Press any key to continue... 

Subtest 03 

DMI information save 

This is one of tools to copy the DMI information to a new PCB after replacing.  

This subtest saves all the DMI data in a floppy disk.  

Subtest 04 

DMI information recovery 

This is one of tools to copy the DMI information to a new PCB after replacing.  

This subtest writes all the DMI data in the floppy disk into the new PCB.  

Note: 

Since the data of UUID is updated every time when this subtest, DMI information 
recovery, is done, the saved UUID data is not written. 

 

Summary of Contents for Satellite A200 Series























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands