manualshive.com logo in svg

Toshiba Satellite A200 Series, Maintenance Manual

Share
Download
Toshiba Satellite A200 Series Maintenance Manual Download Page 150

3.24  Floppy Disk Drive Utilities  

3  Tests and Diagnostics 

PORTEGE A200 Maintenance Manual (960-499) 

 

3-53 

3.

 

COPY program 

(a)

 

When COPY is selected, the following message appears. 

FLOPPY DISK FORMAT & COPY : VX.XX 
Type select (0:2DD,3:2HD) ? 

(b)

 

Selecting a media/drive type number will display a message similar to the one below. 

Insert source disk into drive A: 
Press any key when ready. 

(c)

 

Remove the Diagnostics Disk from the FDD, insert the source disk and press any 
key. The following message will appear, indicating the program has started. 

[ FDD TYPE ] : TRACK 

  

= XXX 

[ FDD TYPE ] : HEAD

 

 

= X 

[ FDD TYPE ] : SECTOR   = XX 

Copy start 

[[ track,head = XXX X ]] 

(d)

 

The following message will appear. 

Insert target disk into drive A: 
Press any key when ready. 

(e)

 

Remove the source disk from the FDD, then insert a formatted work disk and press 
any key. The following message will appear and start copying to the target disk.  

[[ track,head = XXX X ]] 

(f)

 

When the amount of data is too large to be copied in one operation, the message 
from step (b) is displayed again. After the floppy disk has been copied, the 
following message will appear. 

Copy complete 
Another copy (1:Yes/2:No) ? 

(g)

 

To copy another disk, type 

1

 and the message from step (a) is displayed again. 

Entering 

2

 returns the test program to the DIAGNOSTIC MENU. 

Summary of Contents for Satellite A200 Series























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands