Toshiba Satellite A200 Series Maintenance Manual Download Page 190

Page: 190 / 342

3 Tests and Diagnostics

3.30 SETUP

3-92

PORTEGE A200 Maintenance Manual (960-499)

Password

This option sets or resets the user password for power on and instant security (

Fn+F1

Registered

The user password has been registered.

Not registered

The user password has not been registered.

For details on setting the user password, refer to the User’s Manual.

Boot Priority

(a)

Boot Priority

Use this option to set the priority for booting of the computer and the priority for the
HDD for booting.

FDD

HDD

CD-ROM

LAN:

The computer looks for bootable files in the

following order: FDD, HDD, CD-ROM
(*1) and LAN

HDD

CD-ROM

LAN

FDD:

The computer looks for bootable files in the
following order: HDD, CD-ROM, LAN
and FDD.

FDD

CD-ROM

LAN

HDD:

The computer looks for bootable files in the

following order: FDD, CD-ROM, LAN
and HDD.

CD-ROM

LAN

HDD

FDD:

The computer looks for bootable files in the

following order: CD-ROM, LAN, HDD
and FDD.

CD-ROM

LAN

FDD

HDD:

The computer looks for bootable files in the
following order: CD-ROM, LAN, FDD
and HDD.

HDD

FDD

CD-ROM

LAN:

The computer looks for bootable files in the
following order: HDD, FDD, CD-ROM
and LAN. (Default)

(*1) CD-ROM refers to an Optical Disk Drive.

(b)

HDD Boot Priority

Use this option to set the booting priority from HDD.

Built-in HDD

PC Card

(Default)

When HDD occurs in the boot priority in the following order:

built-in HDD and PC card.

PC Card

Built-in HDD

Summary of Contents for Satellite A200 Series























































































































































































































































































































































Search results

Summary of Contents for Satellite A200 Series

Reviews:

Brands by name

Popular brands

Toshiba Satellite A200 Series, Maintenance Manual

Search results

Summary of Contents for Satellite A200 Series

Reviews:

Brands by name

Popular brands