Toshiba Satellite A200 Series Maintenance Manual Download Page 128

Page: 128 / 342

3.14 Real Timer Test

3 Tests and Diagnostics

PORTEGE A200 Maintenance Manual (960-499)

3-31

Subtest 03

Real time carry

Caution

When this subtest is executed, the current date and time are erased.

This subtest checks the real time clock increments, making sure the date and time are
displayed in the following format:

Current date : 12-31-1999
Current time : 23:59:58

The real time increments are automatically executed and the following is displayed:

Current date : 01-01-2000
Current time : 00:00:00

PRESS [Enter] KEY TO EXIT TEST

To exit the test, press

Enter

Summary of Contents for Satellite A200 Series























































































































































































































































































































































Search results

Summary of Contents for Satellite A200 Series

Reviews:

Brands by name

Popular brands

Toshiba Satellite A200 Series, Maintenance Manual

Search results

Summary of Contents for Satellite A200 Series

Reviews:

Brands by name

Popular brands