Operation
Press [OPERATION] button for more than
three seconds. (Less than 10 seconds)
Motions
The operation indicator is on.
The unit beeps three times and continues to operate.
If the unit is not required to operate at this time, press [OPERATION]
button once more or use the remote control to turn it off.
Operation
Press [OPERATION] button for more than
three seconds. (Less than 10 seconds)
Motions
The operation indicator is on.
The operation indicator is turned off.
The unit beeps three times.
If the unit is required to operate at this time, press [OPERATION] button
once more or use the remote control to turn it on.
9-3-2. How to Cancel the Auto Restart Function
To cancel auto restart function, proceed as follows :
Repeat the setting procedure : the unit receives the signal and beeps three times.
The unit will be required to be turned on with the remote control after the main power supply is turned off.
• When the system is on stand-by (not operating)
• When the system is operating
9-3-3. Power Failure During Timer Operation
When the unit is turned off because of power failure
during timer operation, the timer operation is can-
celled. In that case, set the timer operation again.
NOTE :
The Everyday Timer is reset while a command signal
can be received from the remote control even if it
stopped due to a power failure.
FILE NO. SVM-18048
- 48 -
The unit is in operation.
↓
The unit stops operating.
↓
After approx.
three
seconds,
The unit is on standby.
↓
The unit starts to operate.
↓
After approx.
three
seconds,
