FILE NO. SVM-09036
-
26
-
7-5. One-Touch Operation
One touch comfort is the fully automated operation that is set according to the preferable co
n
dition in a region.
*AUTO/L : Fan operates depends on the setting temperature and room temperature.
During the One Touch Comfort mode if the indoor unit receives any signal with other operation mode, the unit
will cancel the comfort mode and operates according to the signal received.
Operation description
When an indoor unit receives "One Touch Comfort Signal" from the remote controller, the indoor unit operates
as following.
1) Air conditioner starts to operation when the signal is received, even if the air conditioner was OFF.
2)
Operation mode is set according to room temperature, the same as AUTO mode.
3) Target temperature is 24ºC.
4) Louver position is set as stored position.
0
12
25
Time after operation
starts (min)
Fan
Operation
AUTO
*AUTO/L
L
5)
Fan is controlled as diagrom.
