Toshiba Qosmio G35 User Manual Download

Page: 247 / 393

247

Using the TOSHIBA RAID Utility

TOSHIBA RAID Console Utility

5.375 x 8.375 ver 2.3

To break the RAID-0 array:

Plug in the AC adapter and power on the computer. (The
computer must be running on power provided by the AC
adapter to perform these steps.)

Insert the Recovery DVD that shipped with your system
into the computer’s CD/DVD drive.

Press F12 to display the boot menu.

Press the right arrow key until the CD icon is highlighted;
then, press Enter.

The following menu is displayed:

(Sample Image) Toshiba Recovery DVD RAID Menu

Your machine supports Redundant Array of Independent Disks

(RAID). Please select the RAID level.

1. Factory Default

Setup the computer ready to support mirroring function.

You can use RAID Utility to configure two hard disks to

become mirror of each other, in which the same data is

written on both hard disks. If one hard disk fails, the

system can still run from the other hard disk. Before using

RAID Utility, your second hard disk can still work as

independent hard disk.

Advance Setting (for Advance users only)

2. RAID-1 - Automatically configure two hard disks of your

computer to become mirror after recovery process is

completed.

WARNING: You can not use the second hard disk for any

other purpose until you use RAID Utility to end mirroring.

3. RAID-0 - Automatically configure computer to support

striping function - data is broken into blocks and written

to both hard disks simultaneously to increase the hard disk

performance.

WARNING: IF ONE HARD DISK FAILS, ALL DATA IS LOST.

Enter selection:"

Summary of Contents for Qosmio G35










































































































































































































































































































































































































Search results

Summary of Contents for Qosmio G35

Reviews:

Related manuals for Qosmio G35

Brands by name

Popular brands

Toshiba Qosmio G35, User Manual

Search results

Summary of Contents for Qosmio G35

Reviews:

Related manuals for Qosmio G35

Brands by name

Popular brands