72
Getting Started
Connecting external display devices
5.375 x 8.375 ver 2.3
Before connecting a television, video projector, monitor or
other external display device, configure your computer for
the type of device you are connecting. To do this, refer to the
documentation for your operating system and the device.
(Sample Illustration) Back of system
You cannot connect both the S-video Out port and the HDMI
Out port to the same device at the same time.
The system display default is set at the factory to S-video Out.
Connecting the display device
If you are connecting a television or other video display
device to the computer’s HDMI Out port, first refer to
“Selecting video cables” on page 72
for guidelines on
choosing a video cable, then refer to
television, projector, or VCR/DVD player” on page 74
.
If you are connecting an SVGA monitor, skip to
an external monitor or projector” on page 76
Selecting video cables
To connect a device to the S-video port, you must purchase an
S-video cable. For the best video quality, always use a
properly shielded cable.
HINT: Toshiba recommends using a cable no longer than
20 feet (approximately 6 meters).
Coaxial Antenna In port
S-video Out port
HDMI Out port
VGA (Monitor) Out port
