manualshive.com logo in svg

Toshiba MMY-MAP0804HT7JP, Service Manual

The Toshiba MMY-MAP0804HT7JP Service Manual is a comprehensive guide that provides step-by-step instructions for owners of this high-quality product. With the ability to download it for free from our website, users can easily access this essential manual to maximize the efficiency and performance of their Toshiba MMY-MAP0804HT7JP device.

Share
Download
background image

– 5 –

SAFETY CAUTION

Please read carefully through these instructions that contain important information which complies with the
“Machinery” Directive (Directive 2006/42/EC), and ensure that you understand them.
Some of the details provided in these instructions differ from the service manual, and the instructions provided
here take precedence.

Generic Denomination: Air Conditioner

Definition of Qualified Installer or Qualified Service Person

The air conditioner must be installed, maintained, repaired and removed by a qualified installer or qualified
service person. When any of these jobs is to be done, ask a qualified installer or qualified service person to do
them for you.
A qualified installer or qualified service person is an agent who has the qualifications and knowledge
described in the table below.

• The qualified service person is a person who installs, repairs, maintains, relocates and removes

the air conditioners made by Toshiba Carrier Corporation. He or she has been trained to install,
repair, maintain, relocate and remove the air conditioners made by Toshiba Carrier Corporation
or, alternatively, he or she has been instructed in such operations by an individual or individuals
who have been trained and is thus thoroughly acquainted with the knowledge related to these
operations.

• The qualified service person who is allowed to do the electrical work involved in installation,

repair, relocation and removal has the qualifications pertaining to this electrical work as
stipulated by the local laws and regulations, and he or she is a person who has been trained in
matters relating to electrical work on the air conditioners made by Toshiba Carrier Corporation
or, alternatively, he or she has been instructed in such matters by an individual or individuals
who have been trained and is thus thoroughly acquainted with the knowledge related to this
work.

• The qualified service person who is allowed to do the refrigerant handling and piping work

involved in installation, repair, relocation and removal has the qualifications pertaining to this
refrigerant handling and piping work as stipulated by the local laws and regulations, and he or
she is a person who has been trained in matters relating to refrigerant handling and piping work
on the air conditioners made by Toshiba Carrier Corporation or, alternatively, he or she has
been instructed in such matters by an individual or individuals who have been trained and is
thus thoroughly acquainted with the knowledge related to this work.

• The qualified service person who is allowed to work at heights has been trained in matters

relating to working at heights with the air conditioners made by Toshiba Carrier Corporation or,
alternatively, he or she has been instructed in such matters by an individual or individuals who
have been trained and is thus thoroughly acquainted with the knowledge related to this work.

• The qualified installer is a person who installs, maintains, relocates and removes the air

conditioners made by Toshiba Carrier Corporation. He or she has been trained to install,
maintain, relocate and remove the air conditioners made by Toshiba Carrier Corporation or,
alternatively, he or she has been instructed in such operations by an individual or individuals
who have been trained and is thus thoroughly acquainted with the knowledge related to these
operations.

• The qualified installer who is allowed to do the electrical work involved in installation, relocation

and removal has the qualifications pertaining to this electrical work as stipulated by the local
laws and regulations, and he or she is a person who has been trained in matters relating to
electrical work on the air conditioners made by Toshiba Carrier Corporation or, alternatively, he
or she has been instructed in such matters by an individual or individuals who have been
trained and is thus thoroughly acquainted with the knowledge related to this work.

• The qualified installer who is allowed to do the refrigerant handling and piping work involved in

installation, relocation and removal has the qualifications pertaining to this refrigerant handling
and piping work as stipulated by the local laws and regulations, and he or she is a person who
has been trained in matters relating to refrigerant handling and piping work on the air
conditioners made by Toshiba Carrier Corporation or, alternatively, he or she has been
instructed in such matters by an individual or individuals who have been trained and is thus
thoroughly acquainted with the knowledge related to this work.

• The qualified installer who is allowed to work at heights has been trained in matters relating to

working at heights with the air conditioners made by Toshiba Carrier Corporation or,
alternatively, he or she has been instructed in such matters by an individual or individuals who
have been trained and is thus thoroughly acquainted with the knowledge related to this work.

Qualified installer

Qualified service
person

Agent

Qualifications and knowledge which the agent must have

Summary of Contents for MMY-MAP0804HT7JP




































































































































































































































































































































Reviews:

No comments

Related manuals for MMY-MAP0804HT7JP

WarmPool DC55 Installation & Operation Manual preview
DC55
Brand: WarmPool Pages: 18
Daikin FXLQ20MHV1 Operation Manual preview
FXLQ20MHV1
Brand: Daikin Pages: 5
Danby DAC10000 Owner'S Use And Care Manual preview
DAC10000
Brand: Danby Pages: 39
Argo DD DCI Series Operating Instructions Manual preview
DD DCI Series
Brand: Argo Pages: 15
BASETech 1516852 Operating Instructions Manual preview
1516852
Brand: BASETech Pages: 12
WAGNER WA-888 User Manual preview
WA-888
Brand: WAGNER Pages: 5
Clatronic CL 3542 Instruction Manual preview
CL 3542
Brand: Clatronic Pages: 62
edc LIMPET Installation And Operating Manual preview
LIMPET
Brand: edc Pages: 46
Mini Gadgets OmniXAirFreshener User Manual preview
OmniXAirFreshener
Brand: Mini Gadgets Pages: 20
Ohyama woozoo AP45-M User Manual preview
woozoo AP45-M
Brand: Ohyama Pages: 72
TCL W5WR1 Manual preview
W5WR1
Brand: TCL Pages: 44
Friedrich MM12YJ Installation And Operation Manual preview
MM12YJ
Brand: Friedrich Pages: 68
Lennox HCF RTL G 14 Installation Operation & Maintenance preview
HCF RTL G 14
Brand: Lennox Pages: 44
SilverOnyx KJ150F-C02 User Manual preview
KJ150F-C02
Brand: SilverOnyx Pages: 14
Hisense AW0521CK1W Use And Installation Manual preview
AW0521CK1W
Brand: Hisense Pages: 14
Wood’s Airmaster WOZ2000 Operating Instructions Manual preview
Airmaster WOZ2000
Brand: Wood’s Pages: 72
Daikin RX20JV1B Installation Manual preview
RX20JV1B
Brand: Daikin Pages: 15
Gibson GAH126R2T - GIBSON 12000BTU 230V 6.0A 9.0E3 SPD 4 WAY AIR DIRECTION Factory Parts Catalog preview
GAH126R2T - GIBSON 12000BTU 230V 6.0A 9.0E3 SPD 4 WAY AIR DIRECTION
Brand: Gibson Pages: 4

Brands by name

Popular brands

Load more brands