Toshiba MMK-AP0157HPUL, Service Manual

Page: 22 / 120

No.
18
19
20
Item
DC motor
Save operation
Outline of specifications
(1) When the fan stator, positioning is performed for the
starter and the rotor. (Vibrate slightly)
(2) DC motor operates according to the command from
the indoor controller.
(Note)
If the fan lock was detected, the operation of the indoor
unit stops and the error is displayed.
(1) The save operation starts when
SAVE
button on the
remotecontroller is turned on.
(2) While the save operation is performed, segment
goes on the screen of the wired remote controller.
(3) The request capacity ratio is restricted to approx.
75% during save operation.
(4) If the save operation was validated, the contents are
held during the operation stop, the operation mode
change and the resetting of power supply. Therefore
the operation at the next time also will be activated
with “Save operation is valid”
Remarks
Check code [P12]
RBC-AMT32UL
SWING FAN
FIX QUIET
COMFORT
SLEEP
1
Hi POWER
To operate the air conditioner with the setting
memorized .
(1) Press the PRESET button. The setting memorized
will be indicated and the air conditioner operates
with regards to the setting.
• The lamp (
White
) on the display panel of the
indoor unit goes on, and operation starts after
approximately 3 minutes.
• Initial setting:
MODE : AUTO
Temperature : 22
PRESET operation
(Wireless remote
control specific
operation)
(Memorized Setting)
(1) Select your preferred operation
(2) Press and hold PRESET button more
than 3 seconds. The
P
make is indicated
and the setting is memorized.
(3) Press the PRESET button to o perate the
setting memorized.
- 22 -