Changing MOUNT-COUNT
●
Step to remove the MOUNT-CONDUIT
1) The MOUNT-CONDUIT can be removed by removing the screw securing
the MOUNT-CONDUIT and them pulling out the MOUNT-CONDUIT.
2) Remove the MOUNT-CONDUIT by direction backside of unit.
●
Step to install the MOUNT-CONDUIT (Option connect power supply 2 Hole)
2) Install the MOUNT-CONDUIT to unit
3) Insert the screw.
Make sure to fix pin
on position lock.
Make sure screw 1 part fix on position.
Direction to remove
Direction to remove
Direction to remove
1) Install the EDGE-SADDLE to MOUNT-CONDUIT
Direction to remove
3) Remove the EDGE-SADDLE
take off from MOUNT-CONDUIT.
Remove the screw 1 part.
- 81 -
Summary of Contents for MMK-AP0157HPUL
Page 14: ...2 WIRING DIAGRAM 14 ...
